Shop & Commercial Floor Epoxy in Cedar Rapids, IA

Shop and commercial floor epoxy is built thicker and tougher than a typical garage coating. In Cedar Rapids, the demand comes from two directions. Homeowners and acreage owners have shops, pole buildings and oversized garages where they work on trucks, equipment and projects. Businesses have service bays, warehouses, small production spaces and back-of-house floors. Both need a floor that takes rolling weight, dropped steel and spilled fluids without peeling.

An economy built on floors that work

Wikipedia describes Cedar Rapids as one of the largest corn-processing centers in the world, with grain processing directly providing about 4,000 jobs. A large Quaker Oats mill still stands on the north side of downtown, and Collins Aerospace is the largest employer. Around that industry are suppliers, contractors, repair shops and warehouses, and many of them have concrete floors that see real abuse.

What a heavy-duty system looks like

• 100% solids epoxy: a thicker build with no solvent to evaporate, which HomeAdvisor lists at $12 or more per square foot for industrial work.
• Broadcast aggregate: sand or quartz spread into the coating for slip resistance in wet or oily areas.
• Chemical-resistant topcoat: urethane or polyaspartic chosen for the fluids in your space, such as oil, coolant, brake fluid or cleaning chemicals.
• Line striping and safety zones: painted walkways, work cells and equipment areas coated in a contrasting color.

Prep on working floors

Shop and commercial slabs often carry years of oil, old sealers or a worn paint. We degrease, diamond grind with dust collection and repair cracks, spalls and joint edges that forklifts and carts have chipped. Saw-cut control joints can be filled with a semi-rigid filler so wheels roll smoothly, or left open where the slab still moves.

Scheduling around your operation

A business usually cannot shut down for a week. We can work in phases, split the floor into sections, or schedule over weekends. Fast-curing polyaspartic topcoats can shorten downtime. We agree on the phasing and the return-to-service time in writing before work starts.

Home shops and pole buildings

Acreages around Center Point, Springville, Atkins and Mount Vernon often have detached shops or pole buildings with large slabs. Those floors see tractors, trucks, snow equipment and welding. We recommend a thicker epoxy base with a flake or aggregate broadcast and a hard topcoat. Weld spatter and dragged equipment will still mark any coating, so we suggest mats or steel plates in welding and heavy-impact areas.

Cold shops

Unheated shops are a challenge in an Iowa winter. Average January lows in Cedar Rapids sit around 11°F, and epoxies need a minimum slab temperature to cure. We schedule cold-shop jobs for warmer months or use temporary heat, and we may choose a polyaspartic topcoat for its wider temperature range.